Leica D-LUX 109 Page 24 Instructions Manual Download

Page: 24 / 302

Preparations

Inserting and Removing the Battery / the Card

•Make sure that the camera is turned off.

Move the release slider to the

[OPEN] position and open the

card/battery door

[OPEN] [LOCK]

Release slider

Insert the battery and card,

making sure that their

orientation is correct

•

Battery:

Push it down until the latch locks the

battery in its correct position.

•

Card:

Push it down until it clicks into place.

Do not touch

the terminals

Charged battery (check orientation)

Card

(check orientation:

terminals face monitor)

Latch

Close the card/battery door and

move the release slider to the

[LOCK] position

■

To remove

•

Battery:

Move the latch in the direction of the

arrow.

•

Card:

Push it further down until it clicks, then

pull it straight out.

Latch

●

Remove the battery from the camera after use.

●

Keep the memory card out of reach of children to prevent swallowing.

●

To remove card or battery, turn the camera off and wait until the Leica logo on the monitor turns

off. (Failure to wait may cause the camera to malfunction and may damage the card or the

recorded data.)

Summary of Contents for D-LUX 109















































































































































































































































































































Search results

Summary of Contents for D-LUX 109

Reviews:

Related manuals for D-LUX 109

Brands by name

Popular brands

Leica D-LUX 109, Instructions Manual

Search results

Summary of Contents for D-LUX 109

Reviews:

Related manuals for D-LUX 109

Brands by name

Popular brands