Leica D-LUX 109 Instructions Manual Download Page 231

Page: 231 / 302

231

Wi-Fi

Operating the Camera by Connecting it to a Smartphone

●

You can register up to 20 smartphones. If the number of registered smartphones exceeds 20,

registrations will be deleted starting from the smartphone touched first.

●

If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted.

●

If the communication environment is bad, the NFC function may not be usable.

●

If there is not a response immediately, shift the position slightly.

●

Do not bump your smartphone strongly against the camera.

●

See the instructions of your NFC-compatible smartphone for more information about smartphone

operation and settings.

●

Metal objects between camera and smartphone may interfere with communication. Also, any

stickers, etc., near the NFC area may affect communication performance.

●

The NFC function cannot be used in the following cases:

•When the camera is turned off (Including [Sleep Mode])

•During motion picture recording

•While recording still pictures (during self-timer countdown)

•When using [Time Lapse Shot]

•When using [Stop Motion Animation]

•When using [Multi Exp.]

•During motion picture playback, during slide shows, during panorama picture playback, and

during continuous playback of group pictures (including pauses in each case)

•While sending pictures by Wi-Fi

•When connected to a computer or a printer

●

You cannot transfer still pictures in RAW format, or motion pictures with a [Rec Quality] of [4K].

Taking pictures via remote control with a smartphone

Connect to a smartphone.

(→226)

Select [

] from “Image Shuttle”.

Take the pictures.

•The recorded images are saved in the camera.

•When a longer focal length is set, the lens barrel extends, which could cause the camera to

change its position if this is not prevented. Make sure to secure the camera in place with a tripod

or by other means.

•Some settings are not available.

Summary of Contents for D-LUX 109















































































































































































































































































































Search results

Summary of Contents for D-LUX 109

Reviews:

Leica D-LUX 109, Instructions Manual, Page: 231 / 302

Search results

Summary of Contents for D-LUX 109

Reviews: