Leica Builder M power, User Manual

Page: 92 / 233

92 Builder
Station Setup, for Builder R, RM,
M power and RM power
9.3.2 Establish Coordinates - Over Known Point
Description The Setup method Establish Coordinates - Over Known Point is used to set up
the instrument on a known point and orient to a known azimuth or to up to five
known backsight points. If more than one backsight point was used, the quality of
the orientation is shown in the result screen.
Diagram
P0 Known Station
P1 Known backsight point
P2 Known backsight point
P3 Known backsight point
α
Azimuth
P1
P2
P3
P0