Leica Builder M power, User Manual

Page: 161 / 233

System Info and Instrument Protection Builder 161
13.2 Instrument Protection (PIN)
Description The instrument can be protected by a P ersonal I dentification N umber. If the PIN
protection is activated, the instrument will always prompt for a PIN code entry after
starting up. As soon as the PIN was activated the access to the PIN code settings
requires the PIN. If a wrong PIN has been typed in five times, a
P ersonal U nbloc K ing
code is required which can be found on the instrument delivery papers. If the PUK
code was entered correctly, the PIN code is set to default value "0" and the PIN
protection is deactivated.
Activate PIN code
step-by-step
Step Description
1.
Turn on the instrument by pressing the key.
)
Make sure that THEO mode is active.
2.
Press for approximately 5 seconds.
3. Press PIN to access PIN code settings.
4.
Activate PIN by setting <Use PIN-Code>: On .
5. Enter your desired personal PIN Code (max. 6 character numeric) in
<New PIN-Code>: .
6. Accept with OK .