Leica Builder M power, User Manual

Page: 144 / 233

144 Builder
Data Management Mode, for
Builder RM, M power and RM power
11.5 Measurements
Description Measurement data contains at least horizontal angle, vertical angle, horizontal
distance, slope distance, height difference, data, time and if applicable, line, offset,
easting, northing and height coordinates.
Measurement data can be:
•
viewed
• deleted
• downloaded for data transfer to a further program
View a measure-
ment step-by-step
Step Description
)
Make sure that DATA Mode is active.
1.
Press to set <Type:> Measurement .
2.
Press to set focus on <Pt:> .
3.
Press to toggle through the points.
)
The coordinates are displayed on same screen.
4. Press POINTS to access point management.
)
Measurement values are displayed.