Leica Builder M power, User Manual

Page: 83 / 233

Program Mode, for Builder R, RM,
M power and RM power Builder 83
Combining
MEASURE and
RECORD step-by-
step The key combination of MEASURE and RECORD can be used to measure non acces-
sible points with the prism, for example building corners.
Step Description
)
Make sure that PROG Mode is active.
)
Make sure that <Measure&Record: MEAS/REC> is set. Refer to "6
Configuration Mode" for information on how to make the setting.
1. Position the prism at the same distance from the instrument as the
building corner to be measured.
2. Press MEASURE to measure the distance.
3. Press RECORD to store the measured distance to the prism and the angles
to the corner of the house.