Leica Builder M power, User Manual

Page: 169 / 233

Check & Adjust Builder 169
Combined adjust-
ment procedure
step-by-step The following table explains the most common settings. Refer to the stated chapter
for more information on screens.
Step Description
1.
Turn on the instrument by pressing the key.
2. Level up the instrument. Refer to "5.2 Instrument Setup" for more infor-
mation.
)
Make sure that THEO mode is active.
3.
Press for approximately 5 seconds until SYSTEM INFO is active.
4. Press CALIBR .
5. Press NEW .
6. Aim with the telescope accurately at a
target at a distance of about 100 m.
The target must be positioned within
± 5° of the horizontal plane.
± 5°
~ 100 m