8
iCON grade, System Installation
2
System Installation
2.1
iCON grade Control Panel
Programming the
panel
Programming the control panel is done through a standard serial port.
The serial port is located under the wire cover on the MMB1300.
Cradle with wire cover removed
The programming is performed using a graphical upload program, called
“hmcprogrammer.exe” together with three .dll files. They can be down-
loaded, packed together with a short user guide, in a .zip file from the
home page together with the firmware update files.
The .zip file should be unpacked in a known folder on the PC, for example
use c:\update\hmcprog\.
See chapter "How to Upgrade the Firmware" for further instructions.
1
+12V out
2
VCAN2
3
GND
4
CAN2 LOW
5
CAN2 HIGH
6
VCAN
7
GND
8
CAN LOW
9
CAN HIGH
10 JB-xx Sleep
11 Rx
12 TX
13 GND
14 Vout (SW)
15 Right -
16 Right +
17 Right Auto
18 Left -
19 Left +
20 Left Auto
21 Serial port RS232
1
11
12
13
14
15
16
17
18
19
20
2
3
4
5
6
7
8
9
10
21
