26
iCON grade, System Installation
8. At this menu option you setup the measurements of the blade and
position of the GNSS antenna.
When pushing a line on the screen, the line becomes green and the
length of the line can be entered in the bottom of the screen.
9. Exit the settings page by pressing the
button. You will be
asked to save the settings.
Press “Yes” if the settings are correct.
Pressing “No” will undo the settings.
Setup Dual GPS in
3D mode
To setup the system as dual GNSS, please follow the description below:
The settings for dual GNSS can be found at:
Main menu > Settings > Instruments
1. Enter the menu
Instruments
in the Settings menu.
2. Make sure that the settings in the Sensor configuration menu are
correct.
Top view of the blade.
