21
iCON grade, System Installation
2.6
Rotation Sensor
Rotation sensor
The rotation sensor consists of the following parts:
•
Rotation sensor
•
Machine specific mounting plate
•
Nylon spacing ring
•
Nylon locking ring
•
Anti rotation arm
The following instructions apply to most graders on the market. To install
rotation sensors on other machine types, like Volvo and Champion, refer
to the instructions included in the machine's kit.
Install the sensor
To install the sensor, complete the following steps:
1. Rotate the circle so that the blade is square to the machine.
2. Disassemble the rotation sensor by loosening the four bolts in the
locking ring and carefully pulling the sensor apart.
3. Remove the existing hydra swivel lid and replace it with the sensor
mounting plate.
Remember to move the gaskets from the existing lid to the mounting
plate.
The rotation sensor is in most cases mounted on top of the hydra swivel
in the drawbar.
