manualshive.com logo in svg

Leica BIOSYSTEMS Aperio AT2 DX, User Manual

Share
Download
Leica BIOSYSTEMS Aperio AT2 DX User Manual Download Page 10

Aperio AT2 DX User’s Guide, Revision A © Leica Biosystems Imaging, Inc. 2019

10

Chapter 1:  Introduction

Symbols and Warnings

The following symbols are used throughout the documentation to alert you to potential danger in operating the scanner.

Symbol

Description

The exclamation point within an equilateral triangle is intended to alert you to the presence of 
important operating and maintenance (servicing) instructions.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the 
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock to persons.

The flat surface with waves symbol within an equilateral triangle is intended to alert you to the 
presence of hot surfaces which could cause burn damage.

Caution: Federal (U.S.) law restricts this device to sale by or on the order of an appropriately licensed healthcare practitioner.

IMPORTANT

If the scanner is used in any manner not specified in this documentation, the protection provided by the equipment may be 
impaired.

WARNING: This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance 
with the instructions in this manual it may cause interference to radio communications. It has been tested and found to 
comply with the limits for a Class A computing device (pursuant to Subpart B of Part 15 FCC Rules), which are designed to 
provide reasonable protection against such interference when operated in a commercial environment. 

Summary of Contents for Aperio AT2 DX



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands