Lehigh DTM-MA, Manual

Page: 19 / 46

When a preset is active, only it's included zones are affected by the master up/down buttons. By
default, all zones are included in a preset.
Example 1: You want the Full preset to set all zones to 100% except for zone 6. Set the Full preset to
exclude zone 6, include all other zones.
Example 2: You want the lights for a podium, zone 3, to be controlled separately from the other lights
in the room. Set preset 5 to include only zone 3 and name it 'Podium on'. Set preset 6 to include only
zone 5 and name it 'Podium off'. Set all other presets to exclude zone 3. Set zone 3 to 100% and store
it to preset 'Podium on'. Set zone 3 to 0% and store it to preset 'Podium off'. Set the levels of the other
presets as desired. To turn the podium lights on or off, activate 'Podium on' or 'Podium off' at any
station in the system.
2.5.2 Preset outputs
Up to 5 outputs can be associated with a preset. The output setting will be triggered when the preset is
activated. For example, if Preset 1 is associated with output port 'shd1' and setting 'down', then when
Preset 1 is activated, “shade 1” will go down.
2.5.3 Presets table

preset name: 1 to 9 characters. Off and Full cannot be renamed.

fade time: 0 to 60:59 (minutes:seconds).

zones button: set zone levels/colors for the preset, and the included zones.

number of outputs: if there are output ports (e.g., shades) to be controlled when the preset is
activated, set the number of them here. Then, select the output port and setting in the Output
table.
15