46
Hydraulic system settings
The hydraulic system has been adjusted to correct values at the factory and usually there is no
need to adjust them.
All boom cylinders are equipped with two load control valves (Figure 24 (1)) which prevent
boom movements in case of, for example, a hydraulic hose failure.
Figure 24 Cylinder hydraulic manifolds. JIB cylinder (left) and lift cylinder (right).
When the lower boom emergency lowering is used, the electric solenoid (2) located in the lift
cylinder’s hydraulic
manifold engages oil flow into the tank and the booms move downwards.
The oil from the lift cylinder is directed to other cylinders, if other emergency lowering
functions are used simultaneously.
Summary of Contents for 135 NEO
