19
Boom centre position indicator (slewing)
The slew ring of the access platform is equipped with inductive sensor which
lights the green boom centre position indicator light whenever the 1
st
boom
is above the transport support. Indicator light is only an aid and does not
guarantee that booms will lower straight to transport supports.
Boom centre position light is blinking when boom is nearby its centre
position. Automatic levelling up is disabled to prevent collisions on outriggers up position.
Use outriggers only when boom center position light is on!
Always visually ensure that the booms are properly placed on their
transport supports!
Boom transport support indicator light
Boom transport support indicator light will stay continuously green when all
booms are properly placed on their transport supports.
Boom transport position light is in blinking when boom is on raised transport
position. This situation is used to cross high obstacles. Driving is possible on
lowered speed. Automatic levelling is disabled but manual levelling is
allowed. Return booms back to transport position when raised position is not required.
Low fuel level indicator
Low fuel level indicator lights up when the fuel level is low (approx. 1.5 l).
When the low fuel indicator light is lit refuel as soon as possible.
Fuel tank capacity is 6,1 l.
Summary of Contents for 135 NEO
