LEGRAND Trimod 10 kVA, Operating And Maintenance Manual

Page: 28 / 88

28
®
4.1 Visual inspection
When the UPS is delivered, examine the packaging and product carefully to see if any damage was done during transport.
In particular check the integrity of the indicator on the external “Shock Watch” label.
If either possible or ascertained damage is found report it immediately to:
- the carrier;
- the LEGRAND® Technical Assistance Centre
Make sure that the unit received corresponds to the material specified on the delivery document.
The UPS Trimod® packaging protects the equipment against mechanical and environmental damages.
For greater protection it is also wrapped in a transparent film.
4.1.1 Checking the equipment and accessories supplied
The equipment and relative accessories supplied (as agreed with the manufacturer) must be in perfect condition. Before
it is shipped the equipment is checked carefully; however, it is always advisable to check it is complete and in order when
receiving it.
Make sure that:
- The shipping data (consignee’s address, number of packs, order number, etc.) are the same
as those written on the accompanying documents;
- The technical-legal documentation that comes with the equipment includes the user manual
for the specific type of UPS to install together with the CE Declaration of Conformity.
In the case of defects and/or material missing, send a report immediately to the Manufacturer and wait for his instructions
before commissioning the equipment.
4.2 Unpacking
To remove the packing material observes the ‘ARROW’ on
the outside box. To remove the UPS from the packaging
follow these steps:
1. cut the wrapping and open the plastic safety straps;
2. open the top of the cardboard box;
3. remove the top protection;
4. remove the four corner protections;
5. remove the packaging container, pulling it upwards;
6. remove the pallet and front/rear bracket from the
UPS, loosening the 4 securing screws;
7. inspect the UPS to see if it has been damaged in any
way. Notify the carrier and supplier immediately if any
apparent damage is found;.
Keep the packaging material in case the UPS has to be
shipped in the future. The packaging materials are 100%
recyclable; if you want to dispose of them please comply
with the existing laws.
4.3 Checking the contents of the pack
Below is a list of the materials supplied. The list is general. Please refer to the packing list for
shipment details.
4. Unpacking