LEGRAND STARK 10 kVA Installation And User Manual Download Page 31 | Manualshive

Page: 31 / 52

LEGRAND STARK 10 kVA Installation And User Manual Download Page 31

31

Output voltage setting (Note: Insi-

de the broken line is the flashing

part.)

Frequency setting (Note: Inside

the broken line is the flashing

part.)

In the mode setting press “ON” or in frequency setting

press “Off”, it goes to the output voltage setting. The

output voltage line flashes as in above picture

1. Use button “



” to choose the different output volta-

ge. There are 3 different voltages---220, 230, 240.

2. Press “ON” to exit the output voltage setting and

save the output voltage setting value, and goes to

frequency setting.

3. Press “OFF” to exit the output voltage setting, and

goes to mode setting.

In the output voltage setting press “ON” or in battery

capacity setting press “OFF”, it goes to the frequency

setting. The frequency line flashes as in above picture.

1. Use button “



” to choose the different frequency.

There are 2 different frequency---50,60Hz.

2. Press ”ON” to exit the frequency setting and save

the frequency setting value and goes to battery

capacity setting.

3. Press ”OFF” to exit the frequency setting, and goes

to output voltage setting.

4.4.2 Output voltage setting

4.4.3 Frequency setting

CAUTION:

When powered by inverter, it is necessary to turn off the inverter

before setting voltage and frequency level.

CAUTION:

When powered by inverter, it is necessary to turn off the inverter

before setting voltage and frequency level.

«
...
29
30
31
32
33
...
»

Summary of Contents for STARK 10 kVA





















































Reviews:

No comments