30
Boost
Charging
Floating
3. Pressing “scroll” button, you may circulate all messages from the first one to the last
one then returns to the first one and vice versa.
4. All alarm codes are present when abnormal behavior(s) occur(s).
Mode setting (Note: Inside the
broken line is the flashing part.)
The setting function is controlled by 3 buttons
(
, OFF, ON):
---goes into the setting
page and value adjustment; OFF---for exit setting;
---for choosing different pages.
After the UPS turn ON, press buttons “
” & “OFF” for 2 seconds and then goes into the
setting interface page
After entering the setting menu, its mode setting de-
faulted, and the mode setting line flashing as in above
picture.
1. Use button “
” to choose different mode. There are
3 different modes for setting: ECO, PAL, NOR.
2. Press “ON” to exit the mode setting and save the
mode setting value and goes to output voltage
setting.
3. Press “OFF” to exit the mode setting, and goes to
parallel redundancy quantity setting.
4.4 PARAMETERS SETTING
4.4.1 Mode setting
Summary of Contents for STARK 10 kVA
Page 51: ...51 ...
Page 52: ...www informups com ...