INTRODUCTION (CONTINUED)
After completing all installation procedures for your FlexView Conferencing Cart and any options
you may have purchased, learn to correctly operate your HuddleSHOT FC by using the additional
documentation available online at:
https://www.legrandav.com/products/technical_furniture/display_carts_and_stands/flexview_videoconferencing_cart_with_huddleshot
Some of the additional documents include:
• The Complete Manual for the HuddleSHOT FC (411-0037-30, this manual also includes camera
configuration details such as system administration, operation, and troubleshooting.)
• The Installation Guide for the HuddleSHOT FC (411-0037-31, a subset of the complete manual.)
• The HuddleSHOT FC Firmware Release Notes
NOTE
: All documents may be accessed at www.legrandav.com.
Page 7
CONSIDERING DISPLAY AND CAMERA HEIGHTS
NOTE
:
• Your display (not provided) attaches to a pre-installed horizontal mounting bracket on your FlexView
conferencing cart. (
FIGURE A
)
• With casters, your pre-installed horizontal mounting bracket measures 61” (1549 mm) from the floor
and can be moved 4” (102 mm) up or 8” (203 mm) down to accommodate your display.
• From the floor, the default camera height measures 36” (914 mm), but can be configured to a 42”
(1067 mm) height, if preferred.
• Before proceeding, determine your required horizontal mounting bracket height by referring to the
information provided with your display and the clearance provided when your camera is in both the
default and changed positions.
FIGURE A
Display
Height
Default
Camera Height
36” (914 mm)
Display Height
Measurement
Horizontal Mounting Bracket
Pre-Installed at 61” (1549 mm)
Display
Clearance
Optional
Camera Height
42” (1067 mm)
5 2/5”
(137 mm)
Caster Height
1” (25 mm)
2” (51 mm)
Leveling Feet Height
Retracted and Extended
