REMOVING LEVER LOCK PLATE AND CHANNELS (CONTINUED)
Page 16
NOTE
:
• The (12x) wire ties (L), (8x) cable management clips (M), and
(8x) 8-32 pan head screws (N) are provided to properly secure
cables inside your cart.
• The following steps provide an example use of the hardware for
convenience.
• Adjust torque on power driver to lightest setting and only
increase as necessary.
1. Use power driver, 2 Philips bit and 8-32 pan head screws (N) to
attach cable management clips (M) to channels in your cart.
(
FIGURE W
)
2. Use wire ties (L) to secure cables to the cable management
clips (M).
NOTE
:
• The Lever Lock plate or channel may be reinstalled on the brackets at different depths.
• All 4 corners of the plate or channel must be inserted into adapter brackets at the same depth in order
to function correctly.
• Use (20x) #6 washers (K) for equipment mounting convenience.
UNDERSTANDING CABLE MANAGEMENT
Channel Inside of FlexView Cart
Cable
FIGURE W
N
L
M
WARRANTY
For warranty information, refer to legrandav.com/policies/warranty_information.
Corporate Headquarters
P: (866) 977-3901 | F: (877) 894-6918 | legrandav.com | [email protected]
Middle Atlantic Canada
P: (888) 766-9770 | F: (888) 599-5009 | ca.middleatlantic.com | [email protected]
Middle Atlantic EMEA Technical Support
P: +31 495-726-003 | [email protected]
Factory Distribution
United States: New Jersey, California, and Illinois | Canada: Ontario | The Netherlands: Weert
At Legrand AV Inc. we are always listening. Your comments are welcome.
Legrand AV is an ISO 9001 and ISO 14001 Registered Company.