Contents
A Quick Look at the OneLINK Device
Connector Panel of the Receiver
About Installations Using Half-Recessed Ceiling Mounts
Connections for HDBaseT Cameras
Connections for HDBaseT Cameras Used with Codecs
Connecting a Vaddio HDBaseT Camera and Polycom Codec
Connecting a Vaddio HDBaseT Camera and Cisco Codec
Hardware Note: Connections and Configuration Changes
OneLINK Device Configuration for Audio Using a Codec
Working with the Connected Camera
Initial Device Set-Up and System Administration Tasks
Initial Device Set-Up Using the Vaddio Device Controller
Initial Device Set-Up Using the Vaddio Deployment Tool
Accessing the Web Interface Manually
If the Device Is At 169.254.10.1
Completing the Initial Device Set-up
Configuring Access and Other Security Settings
Configuring a Static IP Address for a Device Currently at 169.254.10.1
Changing from an Automatically Assigned Address to a Static IP Address
Changing the Device's Hostname
Specifying Time Zone and NTP Server
Adding Room Information to the Web Interface
Accessing the Connected Camera's Web Interface
Performance and Behavior Settings
Configuring USB Streaming Settings
ii