LEGRAND 5 735 04 Technical Data Manual Download Page 13

Page: 13 / 38

13/38

CONTENTS

Cat. No(s).: 5 735 04/05

5 735 12/13

KNX

Arteor 4 and 6 touches glass controls

Technical data sheet: S000090563EN-2

Updated: 07/06/2016

Created : 27/07/2015

11. COMMUNICATION OBJECTS DESCRIPTION (continued)

11.2.1.1 Switching (cont.)

SubFunction

Short/long

Parameters

Setting

Short push reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after short pressing

the push button related to the channel.

“No reaction”: A short push does not change the object value and also does not send a telegram.

“On”: After short push, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off”: After short push, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : After short push, the switching value stored in the communication object is inverted and the new value is sent
Long push reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after long pressing

the push button related to the channel.

“No reaction”: A long push does not change the object value and also does not send a telegram.

“On”: After long push, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off” : After long push, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : After long push, the switching value stored in the communication object is inverted and the new value is sent

Push/Release

Parameters

Setting

Push reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after pressing the

push button related to the channel.

“No reaction”: Pushing a button action does not change the object value and also does not send a telegram.

“On”: Pressing a push-button, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off”: Pressing a push-button, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : Pressing a push-button, the switching value stored in the communication object is inverted and the new value is sent
Release reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after releasing the

push button related to the channel.

“No reaction”: A release of the push-button does not change the object value and also does not send a telegram.

“On”: After releasing a push-button, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off” : After releasing a push-button, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : Releasing a push-button, the switching value stored in the communication object is inverted and the new value is sent

Summary of Contents for 5 735 04







































Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands

LEGRAND 5 735 04, Technical Data Manual

Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands