LEGRAND 5 735 04 Technical Data Manual Download

Page: 25 / 38

25/38

CONTENTS

Cat. No(s).: 5 735 04/05

5 735 12/13

KNX

Arteor 4 and 6 touches glass controls

Technical data sheet: S000090563EN-2

Updated: 07/06/2016

Created : 27/07/2015

11. COMMUNICATION OBJECTS DESCRIPTION (continued)

11.2.1.10 Conditional mode (continued)

Scenario :

This function allows to recall/save up to 64 scene.

A short push recalls the scene and a special long push (10s) allows to save a scene; for the defined scene number all the involved actuators statuses are

saved.

No.

Object name

Function

Size

Flags

4 (13,22,31)

4 (13,22,31,40,49)

Channel 1 (2,3,4) Action 1

Channel 1 (2,3,4,5,6) Action 1

8-bits scene

17.001 DP_SceneNumber

(1 Byte)

The telegrams to recall the scene with the configured number (1..64) are sent via the group address link with this object.

Mode 1

Parameters

Setting

Scene num. on short push

0..64

This parameters determines which scene (1..64) has to be recalled on rising edge when mode 1 is active

If value “0” is set, no scene is going to be recalled

Mode 2

Parameters

Setting

Scene num. on short push

0..64

This parameters determines which scene (1..64) has to be recalled on rising edge when mode 2 is active

If value “0” is set, no scene is going to be recalled

Dimming :

No.

Object name

Function

Flags

1 (10, 19, 28)

1 (10, 19, 28, 37, 46)

Channel 1 (2,3,4) Mode 1

Channel 1 (2,3,4,5,6) Mode 1

Switching

1.01 DP_Switch ( 1 bit)

CWT

Switching telegrams are sent via the group address linked with this object.

6 (15, 24, 33)

6 (15, 24, 33, 42, 51)

Channel 1 (2,3,4) Mode 1

Channel 1 (2,3,4,5,6) Mode 1

Value Status

5.001 DP_Scaling (1 Byte )

The dimming status telegrams are received from the dimming actuator via the group address linked with this object.

8 (17, 26, 35)

8 (17, 26, 35, 44, 53)

Channel 1 (2,3,4) Mode 2

Channel 1 (2,3,4,5,6) Mode 2

Switching

1.01 DP_Switch ( 1 bit)

CWT

Switching telegrams are sent via the group address linked with this object.

5 (14, 23, 32)

5 (14, 23, 32, 41, 50)

Channel 1 (2,3,4) Mode 1

Channel 1 (2,3,4,5,6) Mode 1

Dimming

3.007 DP_Control_Dimming

( 4 bit)

The dimming telegrams are sent to the dimming actuator via the group address linked with this object.

9 (18, 27, 36)

9 (18, 27, 36, 45, 54)

Channel 1 (2,3,4) Mode 2

Channel 1 (2,3,4,5,6) Mode 2

Dimming

3.007 DP_Control_Dimming

( 4 bit)

The dimming telegrams are sent to the dimming actuator via the group address linked with this object.

Summary of Contents for 5 735 04







































Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands

LEGRAND 5 735 04, Technical Data Manual

Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands