28/38
Cat. No(s).: 5 735 04/05
5 735 12/13
KNX
Arteor 4 and 6 touches glass controls
Technical data sheet: S000090563EN-2
Updated: 07/06/2016
Created : 27/07/2015
11. COMMUNICATION OBJECTS DESCRIPTION (continued)
11.2.1.10 Conditional mode (continued)
2x1 unsigned byte (continued):
Mode 1
Parameters
Setting
Byte value on short push (0-255)
0..255, 1
Here an adjustment is made to define which unsigned 8 bits value is written into the storage cell of the communication object and sent after short
pressing of the push button related to the channel, when the mode 1 is active.
Byte value on long push (0-255)
0..255, 0
Here an adjustment is made to define which unsigned value is written into the storage cell of the communication object and sent after long pressing
the push button related to the channel, when the mode 1 is active.
Mode 2
Parameters
Setting
Byte value on short push (0-255)
0..255, 1
Here an adjustment is made to define which unsigned value is written into the storage cell of the communication object and sent after short pressing
the push button related to the channel, when the mode 2 is active.
Byte value on long push (0-255)
0..255, 0
Here an adjustment is made to define which unsigned value is written into the storage cell of the communication object and sent after long pressing
the push button related to the channel, when the mode 2 is active.
11.2.1.11 Add Enable object
No.
Object name
Function
Size
Flags
3 (12, 21, 30)
3 (12, 21, 30, 39, 48)
Channel 1 (2,3,4)
Channel 1 (2,3,4,5,6)
Enable
1.02 DP_Enable ( 1 bit)
CW
Enable telegrams are received via the group address linked with this object. They are used to lock (disable) or unlock (enable) the corresponding
channel.
They are only visible if “Add Enable object” parameter value is set to “yes”.
11.2.1.12 Invert context information logic
Invert context information logic
Yes / No
This parameter determines the type of logic of context information.
