LEGRAND 5 735 04 Technical Data Manual Download Page 19

Page: 19 / 38

19/38

CONTENTS

Cat. No(s).: 5 735 04/05

5 735 12/13

KNX

Arteor 4 and 6 touches glass controls

Technical data sheet: S000090563EN-2

Updated: 07/06/2016

Created : 27/07/2015

11. COMMUNICATION OBJECTS DESCRIPTION (continued)

11.2.1.9 Multi action (continued)

Parameters

Setting

Short push reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after short pressing

the push button related to the channel.

“No reaction”: A short push does not change the object value and also does not send a telegram.

“On”: After a short push, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off”: After a short push, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : After a short push, the switching value stored in the communication object is inverted and the new value is sent
Long push reaction

No reaction

Off

Toggle

Here an adjustment is made to define which switching value is written into the storage cell of the communication object and sent after a long pres-

sing the push button related to the channel.

“No reaction”: A long push does not change the object value and also does not send a telegram.

“On”: After a long push, the switching value “ON” (binary value, “1”) is transferred into the communication object and sent.

“Off” : After a long push, the switching value “OFF” (binary value,”0”) is transferred into the communication object and sent.

“Toggle” : After a long push, the switching value stored in the communication object is inverted and the new value is sent

Shutter:

No.

Object name

Function

Size

Flags

1 (10, 19, 28)

1 (10, 19, 28, 37, 46)

Channel 1 (2,3,4) Action 1

Channel 1 (2,3,4,5,6) Action 1

Shutter Up/Down

1.008 DP_UpDown (1 bit)

CWT

The movement commands Up/Down are sent via the address linked with this object in order to raise/lower the solar protection.

7 (16, 25, 34)

7 (16, 25, 34, 43, 52)

Channel 1 (2,3,4) Action 1

Channel 1 (2,3,4,5,6) Action 1

Shutter Stop - slats

1.009 DP_OpenClose (1 bit)

CWT

The command “STOP” or “Slats OPEN/CLOSE” are sent via the group address linked with this object.

6 (15, 24, 33 )

6 (15, 24, 33, 42, 51)

Channel 1 (2,3,4) Action 1

Channel 1 (2,3,4,5,6) Action 1

Shutter Status

5.001 DP_Scaling (1 Byte)

The shutter status telegrams are received from the shutter actuator via the group address linked with this object.

8 (17, 26, 35 )

8 (17, 26, 35, 44, 53)

Channel 1 (2,3,4) Action 2

Channel 1 (2,3,4,5,6) Action 2

Shutter Up/Down

1.008 DP_UpDown (1 bit)

CWT

The movement commands Up/Down are sent via the address linked with this object in order to raise/lower the solar protection.

9 (18, 27, 36)

9 (18, 27, 36, 45, 54)

Channel 1 (2,3,4) Action2

Channel 1 (2,3,4,5,6) Action 2

Shutter Stop - slats

1.009 DP_OpenClose (1 bit)

CWT

The command “STOP” or “Slats OPEN/CLOSE” are sent via the group address linked with this object.

Summary of Contents for 5 735 04







































Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands

LEGRAND 5 735 04, Technical Data Manual

Search results

Summary of Contents for 5 735 04

Reviews:

Related manuals for 5 735 04

Brands by name

Popular brands