Installation and start-up of KEOR HPE UPS 60÷80 kVA
Installation et démarrage de l’ASI KEOR HPE 60÷80 kVA
Installazione e avviamento KEOR HPE UPS 60÷80 kVA
18
OMW07096 REV. E
2.3.4 Installation
The product must be installed in strict compliance with the instructions contained in the technical back-
up documentation, including the present safety instructions. In particular, the following points must be
taken into account:
The product must be placed on a base suitable to carry its weight and to ensure its vertical
position;
The UPS must be installed in a room with restricted access, according to standard CEI
EN62040-1;
UPS category: C3 according to IEC 62040-2
Never install the equipment near liquids or in an excessively damp environment;
Never let a liquid or foreign body penetrate inside the device;
Never block the ventilation grates;
Never expose the device to direct sunlight or place it near a source of heat.
Special environmental conditions
The UPS is designed for normal climatic and environmental operating conditions as defined in
the technical specification: altitude, ambient operating temperature, relative humidity and
environmental transport and storage conditions. It is necessary to implement specific
protective measures in case of unusual conditions:
harmful smoke, dust, abrasive dust;
humidity, vapour, salt air, bad weather or dripping;
explosive dust and gas mixture;
extreme temperature variations;
bad ventilation;
conductive or radiant heat from other sources;
strong electromagnetic fields;
radioactive levels higher than those of the natural environment;
fungus, insects, vermin.
Conductive dust ie with carbon particles
Use authorized personnel only
All transport, installation and start-up operations must be carried out by qualified and trained
personnel.
The installation of the
UPS
must be carried out by authorized personnel, in compliance with
national and local regulations.
