54A0059_V1.1_EN / LeddarSteer DBSD Evaluation Board
–
User Guide
31 | 50
7.2.2.
Heater
For connector P3, insert the 6-pin mating connector from the wiring harness into the connector until it is fully
inserted. The connector is keyed and will only insert one way. This is
not
a latching connector; therefore, no
audible click will be heard and it is not necessary to depress a latch to release it. To disconnect this connector,
pull it gently upwards.
Do not apply force to the connector as this could cause damage.
Fig. 16: Connector P2 inserted into the driver board
7.3.
Connecting the Driver Board to the Computer (Universal Serial Bus)
The driver board communicates with a computer through a virtual serial port over USB. To connect the EVB
to a PC, simply insert the provided USB cable into connector J1.
Fig. 17: USB cable inserted into the driver board
