WaveSurfer Accessory
(For details, see the section, "Charge LED Lamp Indications", on
page 15 of the instruction manual for BATTERY PACK.)
If the remaining battery charge level becomes 80% or more, five
charge LED lamps are lit in red. Charge the BATTERY PACK
until all five LED lamps are lit in red.
When the charging is completed, the CHARGE lamp goes off and
five charge LED lamps (red) also go off.
NOTE 6 It is not necessary to set the charging conditions and
charging time.
The reference charging time until the BATTERY PACK is fully
charged is approximately 3 hrs.
It takes a relatively short time to charge the BATTERY PACK to a
remaining battery charge level of 80%.
(e) Completing the Charging of the BATTERY PACK
When the CHARGE lamp on the BATTERY CHARGER goes off
and the charging is completed, turn OFF the POWER switch on the
BATTERY CHARGER.
(f) Disconnecting the DC OUT Cable and CHARGE
CONTROL Cable
For details about how to connect the BATTERY PACK to the
oscilloscope, how to operate the oscilloscope by the DC power, and
how to read the remaining battery charge level indications, see the
instruction manual for BATTERY PACK.
15
