background image

 

BATTERY CHARGER User's Manual

„

 Safety Requirements 

This section contains information and warnings that must be 
observed to keep the BATTERY CHARGER operating in a correct 
and safe condition. You are required to follow generally accepted 
safety procedures in addition to the safety precautions specified in 
this section. 

Safety Symbols & Terms 

 

The following symbols & terms may appear on the product and they 
alert you to important safety considerations. 

 

This symbol is used where caution is required. Refer to the   
accompanying information or documents in order to protect   
against personal injury or damage to the BATTERY CHARGER. 

 
 
 

This symbol warns of a potential risk of shock hazard. 

 

 

The CAUTION sign indicates a potential hazard. It calls   

attention to a procedure, practice or condition which,   

if not followed, could possibly cause damage to equipment.   

If a CAUTION is indicated, do not proceed until its   

conditions are fully understood and met. 

 

 

The WARNING sign indicates a potential hazard. It calls   

attention to a procedure, practice or condition which, if not 

followed, could possibly cause bodily injury or death.   

If a WARNING is indicated, do not proceed until its   

conditions are fully understood and met. 

CAUTION 

WARNING 

 

 

2

Summary of Contents for WS-BATT-CHRG



























Reviews: