Leatt MOTO BOOTS Manual Download

Page: 3 / 23

Testing and Approval

Leatt

5.5/4.5 boots are a Personal Protective Equipment (PPE) belonging to the second Category Risk

according to the REGULATION (EU) 2016/425 and it complies with the requirements laid down by the European

Standard EN13634:2017 Protective footwear for motorcycle’. It has been certified by DOLOMITICERT SCARL, Zi

Villanova, 32013 Longarone, Italy, Notified Body Number 2008.

This European Standard includes several properties which have two performance levels in terms of

protection afforded. These cover the degree of risk or hazard that a motorcyclist will face in terms of the

type of riding and the nature of the accident. At an increased accident risk “Level 2” the performance features

offers increased performance. This higher performance level has an increased penalty of weight and comfort

and may not be acceptably to all riders.

To view the Declaration of Conformity to PPE Regulation (EU) 2016/425 please navigate to leatt.com and

select the DOCUMENTS tab on your product’s page.

Protection provided

Leatt’s boots are designed and manufactured to provide both limited protection of the foot and lower leg

against the risk of impact in the event of a fall and maximum natural mobility to ride motorcycle with comfort

and security.

Both active and passive protection is given by the assembled plastic components and the articulation of

boot joint and mechanism that allows for natural foot, leg and ankle mobility. For proper function of the

boot it must fit and cover the foot and leg correctly. Make sure you use the correct size according to the

manufacturer’s size chart.

Use

Our boots are manufactured with the latest technology and are specifically designed for Motorcycle riders’

use only. The boots are not to be used for any other kinds of sports.

FlexLock system operation and instructions (p2)

Marking and labeling

The following diagrams provide important information about this product and the protection it provides.

WARNING

All motorized sports are HAZARDOUS, that involves various known and unknown risks that could result
injuries, permanent paralysis or even death. Leatt’s boots were designed to reduce the risk of injuries
to the foot in the event a motorcycle crash and were tested for cut and abrasive resistance as well. The
plastic components were also tested to be able to prevent injuries. No product, including Leatt’s boots, can
completely prevent injuries of any kind.

We strongly advise to check the general state of your boot, i.e, proper functioning of the closure system and
the fastening of the mechanisms, no tearing/perforation of the upper or sole, before any use.

Please read the instructions carefully and contact your local dealer if you need more information.

Technical reference norm and corresponding pictogram

First 2 – Level of height of upper

Second 1 – Performance level achieved in the abrasion resistance testing

Third 2 – Performance level achieved in the impact cut resistance testing

Fourth 2 – Performance level achieved in the transverse rigidity of whole

footwear testing

Manufacturer trademark

5.5 FLEXLOCK, 4.5

Name of the model

LEATT.COM

Website Address