Learjet 35 Reference Handbook Download

Page: 455 / 482

Leerjet 35/36

Developed for Training Purposes

6-21

February 2001

Servicing

Many factors influence snow, ice, and frost accumulation and
the effectiveness of deicing fluids. These factors include:

ambient temperature and aircraft surface temperature

relative humidity, precipitation type, and rate

wind velocity and direction

operation on snow, slush, or wet surfaces

operation near other aircraft, equipment, and buildings

presence of deicing fluid and its type, dilution strength,

and application method.

CAUTION:

Type II/IV FPD generally should not be applied

forward of the wing leading edges. If used for deicing, do not
apply forward of cockpit windows. Ensure that radome and
cockpit windows are clean.

CAUTION:

If engines are running when spraying of deicing

fluids is in progress, turn cabin and crew conditioning
switches to OFF.

Summary of Contents for 35



































































































































































































































































































































































































































































































Search results

Summary of Contents for 35

Reviews:

Related manuals for 35

Brands by name

Popular brands

Learjet 35, Reference Handbook

Search results

Summary of Contents for 35

Reviews:

Related manuals for 35

Brands by name

Popular brands