Lean ROBOTIQ AX Series, Instruction Manual

Page: 108 / 112

11. Harmonized Standards
11.1. Applied Standards
This section describes all applied harmonized standards for the design and production of the AirPick Vacuum Gripper. Conformity
of the product is only met if all instructions of the current user manual are followed. Among others; proper installation, safety
measures and normal usage must be respected. A risk assessment specific to the user's final application must also be carried out.
Caution
Conformity of the product is only met if all instructions of the following manual are followed. Among others; installation,
safety measure and normal usage must be respected.
The following standards have been applied:
ISO 12100 2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 9409-1 2004 Manipulating industrial robots – Mechanical interfaces – Part 1: Plates
ISO 4414 2010
Pneumatic fluid power – General rules and safety requirements for systems and their
components
IEC 61000-6-2 2016 Generic standards – Immunity standard for industrial environments
IEC 61000-6-4 2018 Generic standards – Emission standard for industrial environments
EN 50581 2012
Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
Palletizing Solution - Instruction Manual