(Assembly Instructions Continued)
-
To reduce the risk of serious injur y:
•
Check the condition of the power transfor mer s , electr ical cords , plugs
and connector s monthly. Keep the power transfor mer and electr ical
cords away from heat sources. Never operate the unit with a damaged
power transfor mer, electr ical cord, plug or connector. Contact your
La-Z-Boy
®
dealer for ser vice.
7. Locate and connect the Power Transfor mer.
•
Locate the Power Transfor mer secured to the rear rail. Carefully cut the
ca ble tie and remove the Power Transfor mer from the rear rail. Remove
the packing and unwind the cord.
•
Locate the Motor Extension Wire attached to the rear of the unit (F
IGURE
6).
Remove tie and unwind cord.
•
Align the w hite dot on the Power Transfor mer connector with the arrow
on the Motor Extension connector (F
I G U R E
7). Push the connector s
together until they are secured with no ga p between them.
8. Attach the outside back upholster y cover.
•
Pull the outside back upholster y cover down tight. Fir mly press the
fastening ta pe on the outside back upholster y cover to the fastening
ta pe on the bottom of the rear rail.
-
To reduce the risk of serious injur y:
•
Provide a clear path for operation of the chair, back and legrest.
Place ta bles and area r ugs at a distance to allow the legrest to fully
extend without r ubbing or interference
.
9. Choose a location for the chair that is close to an electrical outlet and
proceed to the Batter y Backup Assembly Instr uctions and the Operating
Instr uctions .
NOTICE:
To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back.
10. To remove the back, unplug the Power Transfor mer and rever se the
Assembly Instr uctions steps .
(1L6) Luxur y-Lift
®
Power Recliner with
6-Motor Massage & Heat Assembly Instr uctions:
(1L6) Luxur y-Lift
®
Power Recliner with
6-Motor Massage & Heat Assembly Details:
13
12
F
I G U R E
6
F
I G U R E
7
Motor Extension Wire
Rear Rail
Motor
Extension
Connector
Transfor mer
Connector
WARNING
WARNING
