A__mic8 / A__digital8 User Guide
Version: 10.0.0/4
15/66
7. Installing the Unit
7.2
Getting Operational
Once the unit has booted the next steps are:
1.
Check and edit the network settings using the front panel
.
IMPORTANT
: Each streaming port must be given a unique IP address before it is connected to the network
(to avoid IP conflicts).
2.
Connect the device to the network using
ETHERNET A
and/or
ETHERNET B
. If you wish to configure
SMPTE 2022-7 compatible streams, then both ports must be connected.
3.
Open the device's
to check the network communication.
4.
Open the
to check and update the device firmware. Then define the device's sync
settings, sample rate and streaming connections.
5.
Open the
and
pages to adjust the local parameters.
6.
Optional
: open the
to check the status of Ember+ parameters or switch a
parameter manually.
