A__mic8 / A__digital8 User Guide
Version: 10.0.0/4
47/66
11. The RAVENNA Web UI
RX Stream Properties: Using a Custom URL
If the TX stream does not appear in the
Connect
menu, then you will need to select
define the
Stream Source
fields manually. As before, the simplest way to do this is to
or RTSP URLs from the sending device.
Note that the same SDP will announce both streams. If you need to use RTSP URLs, then take care to copy and
paste each one separately - enter the ra0 URL into the upper field and the ra1 URL into the lower field.
If you make a mistake, then an error message will appear:
Incorrect Configuration: Duplicated SDPs
Incorrect Configuration: 2 x Non-redundant SDPs
Once the SDP is entered, the 'Receiver Settings' can be edited as described on the previous page.
