A__mic8 / A__digital8 User Guide
Version: 10.0.0/4
42/66
11. The RAVENNA Web UI
A similar method can be used to copy and paste the RTSP URLs:
1.
On the sending device, use the
RTSP URL
buttons in the 'TX Stream Properties' window to copy the
address for the sending interface.
2.
Then on the receiving device, paste the clipboard contents into the
Stream Source
field:
If the TX stream is redundant, copy and paste the URL for the each of the sending interfaces separately - enter
the ra0 URL into the upper field and the ra1 URL into the lower field.
The receiving device will now use the RTSP URLs to request the SDP information from the sender.
In both cases, once the 'Stream Source' is defined, the 'Receiver Settings' and 'Media Settings' can be completed
in the
manner.
