A__mic8 / A__digital8 User Guide
Version: 10.0.0/4
16/66
8. Front Panel Parameters
8. Front Panel Parameters
The front panel display and rotary control provide access to local device parameters:
Turn the control to scroll through the available menus. Then push down to access the next level or edit the value.
In each case, you can confirm all changes by pressing down on the
o
(ok) symbol. Alternatively, to exit without
accepting the changes, press down on the
x
(exit). A step-by-step example is described below.
8.1
Editing Parameters from the Front Panel
The steps below show how to edit the
Device ID
. All other parameters can be edited in a similar manner.
1.
Turn the rotary control until you see the parameter you wish to edit - the current value is displayed. Then
push down on the control to edit the ID - a cursor appears below the first field:
2.
Turn the rotary control again to select a character, and press down to edit the selected field - the field
flashes with a "filled" background:
3.
Turn to select a new value, and press down to confirm the change.
4.
Repeat steps 2 and 3 to edit the other character fields as required.
5.
Finally, turn the control to select the
o
(ok) symbol, and press down to confirm the
Device ID
change -
the changes are accepted:
Alternatively, to exit without accepting any of the character field changes, press down on the
x
(exit) symbol.
