LaView LV-D2104CS Series User Manual Download

Page: 23 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The device automatically enters

Live View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC

many times (depending on which menu you’re on) brings you to the Live View mode.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are

alarms occur as soon as possible.

Table 3.1 Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands