LaView LV-D2104CS Series User Manual Download

Page: 135 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

134

12.2

Searching & Exporting Log Files

Purpose:

The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and

exported at any time.

Steps:

Enter the Log Search interface.

Menu > Maintenance > Log Search

Figure 12.6 Log Search Interface

Set the log search conditions to refine your search, including the Start Time, End Time, Major Type and

Minor Type.

Click the

Search

button to start searching log files.

The matched log files will be displayed on the list shown below.

Note:

Up to 2000 log files can be displayed each time.

Figure 12.7 Log Search Results

You can click the

button of each log or double click it to view its detailed information. And you can also

click the

button to view the related video files if available.

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands