LaView LV-D2104CS Series User Manual Download

Page: 85 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

7.1.4

Backing up Video Clips

Purpose:

You may also select video clips to export directly during Playback, using USB devices (USB flash drives,

USB HDDs, USB writer), or DVD-R/W.

Steps:

Enter Playback interface and play back the record file you want to set video clips.

Please refer to

Chapter 6.1 Playing Back Record Files

During playback, use buttons

and

in the playback toolbar to start or stop clipping record file(s).

Quit Playback interface after finishing clipping and you will then be prompted to save the clips.

Note:

A maximum of 30 clips can be selected for each channel.

Figure 7. 17

Interface of Playback by Time

Click

to save video clips and enter Export interface, or click

to quit and do not save video

clips.

Figure 7. 18

Attention to Video Clip Saving

Export.

Click

and start backup.

Note:

If the inserted USB device is not recognized:

•

Click

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands