LaView LV-D2104CS Series User Manual Download Page 96

Page: 96 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

8.4

Handling Exceptions

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.,

• HDD Full:

The HDD is full.

• HDD Error:

Writing HDD error, unformatted HDD, etc.

• Network Disconnected:

Disconnected network cable.

• IP Conflicted:

Duplicated IP address.

• Illegal Login:

Incorrect user ID or password.

• Input / Output Video Standard Mismatch:

I/O video standards do not match.

• Record Exception:

No space for saving recorded file.

Steps:

Enter

Exceptions

interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.5

for detailed alarm response actions.

Figure 8.11 Exceptions Setup Interface

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands