LaView LV-D2104CS Series User Manual Download Page 119

Page: 119 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

118

10.3

10.3 Managing HDD Group

10.3.1 Setting HDD Groups

Purpose:

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD

group through HDD settings.

Steps:

Enter the Storage Mode interface.

Menu > HDD > Advanced

Set the

Mode

to Group, as shown below:

Figure 10.9 Storage Mode Interface

Click the

Apply

button and the following Attention box will pop up.

Figure 10.10 Attention for Reboot

Click the

Yes

button to reboot the device to activate the changes.

After reboot of device, enter the HDD Information interface.

Menu > HDD > General

Select HDD from the list and click the

icon to enter the Local HDD Settings interface.

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands