LaView LV-D2104CS Series User Manual Download

Page: 72 / 153

User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR

Figure 6. 19

Interface of Playback by Log

6.1.6

Playing Back External Files

Purpose:

Perform the following steps to search and play back record files stored in the external storage devices, e.g.,

USB flash drives, USB HDDs.

Before you start:

Please insert the external device(s) with record files into the device.

Steps:

Enter the Playback interface.

Menu>Playback

Click

and s

elect

to enter the External File Playback interface.

The files stored in the extrenal device are listed in the right-side list.

You can click the

button to refresh the file list.

Select a record file and click

to play back it.

Figure 6. 20

Interface of External File Playback

Summary of Contents for LV-D2104CS Series


























































































































































Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands

LaView LV-D2104CS Series, User Manual

Search results

Summary of Contents for LV-D2104CS Series

Reviews:

Related manuals for LV-D2104CS Series

Brands by name

Popular brands