6600-NG User’s Manual
125-9110A
Page 42
3.6
CHANGING MODES
Note: On power-up, Pt, Ps2 and Ps1 are in Measure mode.
Pt Mode
The Pt mode can be changed when the key# symbol
(4)
is displayed to the left of the Pt mode field. Press
key ‘
4
’ on the keypad and the Lower section of the display will appear as shown in Figure 3.23 below.
Figure 3.23 : Select Pt Mode
Press the key with the # (shown in blue) associated with the mode to be selected. Press ‘
2
’ to select Leak
mode. The screen appears as shown in Figure 3.24 below.
Figure 3.24 : Pt Leak mode
‘Leak’ will be blinking in the Pt mode field, waiting for either
GO
or
CANC
to be pressed. (
Caution:
Do
NOT press GO at this moment
). Pressing
GO
will activate Pt Leak mode and stop ‘Leak’ from blinking.
Pressing
CANC
will revert back to Pt Measure mode. For now, press
CANC
and return Pt to Measure
mode.
Press ‘
4
’ to select Pt mode again. Then press ‘
3
’ to select Pt Control mode. The screen appears as shown
in Figure 3.25 below.
Messages
Measure
Leak
Measure
4
±
8
000
Hide/Show Ps2
AC
92%
Pt Mode
1)
Measure
2)
Leak
3)
Control
Press
CANC
to exit
Measure
Measure
Measure
000
Hide/Show Ps2
AC
92%
