C2000 Debugger | 16
©
1989-2023
Lauterbach
This is a common description of the
SYStem.CONFIG
command group for the TI C2000, C5000, C6000
and C7000 DSPs. Each debugger will provide only a subset of these commands. Some commands need a
certain CPU type selection (
<type>
) to become active and it might additionally depend on
further settings.
Ideally you can select with
the chip you are using which causes all setup you need and you do
not need any further
SYStem.CONFIG
command.
The
SYStem.CONFIG
command information shall be provided after the
command, which
might be a precondition to enter certain
SYStem.CONFIG
commands, and before you start up the debug
