ECO GOLD
25/08/2011/ YACE0088
Safety
7
1.2
General safety
Read through the operating instructions carefully. They contain important information for working with
this device. If you have any queries, please contact our Service Department (
Ì
Follow all the directions in these operating instructions. Only in this way is the correct procedure en-
sured when working with the device.
•
Make sure that the device is only operated by instructed specialist personnel.
•
Never operate the device without heat transfer liquid.
•
Never operate the device,
−
if it is damaged,
−
if it is leaking,
−
if the mains cable is damaged.
•
Switch off the device and withdraw the mains plug:
−
when carrying out service or repair work,
−
when moving the device,
−
when installing or removing modules or accessories,
−
in case of danger.
•
Do not make technical modifications to the device. Infringements in this respect invalidate the war-
ranty.
•
Have service and repair work carried out only by specialists.
•
Follow the safety information in the following sections and read it through carefully.
Classes in the EMC standard DIN EN 61326-1.
Class A: Operation only on electrical supply networks without connected domestic areas.
Class B: Equipment for operation on electrical supply networks with connected domestic areas.
With unfavorable network conditions interfering voltage variations can occur.
EMC standard DIN EN 61326-1 (cor-
responds to VDE 0843-20-1)
Devices for Europe
Class B
Devices for Canada and the USA
Class A
Usage restriction
For the EMC standard DIN EN 61326-1:
Devices in
Class A
are only to be operated on electrical supply networks without connected domestic
areas.
Instructions for Class A digital device, USA:
“
Note:
This equipment has been tested and found to comply with the limits for Class A digital device,
pursuant to Part 15 of the FCC (Federal Communication Commission) Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is operated in a com-
mercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense”.
Instructions for Class A digital device, Canada:
“This Class A digital apparatus complies with Canadian ICES-003” (ICES = Interference Causing Equip-
ment Standards).
« Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada ».
