CrossLink-NX Evaluation Board
User Guide
© 2019-2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-EB-02028-1.4
11
1.3.
CrossLink-NX Device
The CrossLink-NX Evaluation Board features the CrossLink-NX device in a 400-ball caBGA package, also referred to as
LIFCL-40-9BG400C. For more information on the capabilities of CrossLink-NX, see
CrossLink-NX Family Data Sheet
1.4.
Applying Power to the Board
Power LEDs light after applying 12 V power to CrossLink-NX Evaluation Board to indicate the board is functioning. An
Early I/O demo design is programmed into on-board boot flash as the default pattern. With this pattern, LED0 (D3)
(mapped an early I/O) immediately turns on as soon as 12 V power is supplied to the board. After about two seconds,
as configuration is successfully completed, DONE LED (D18) lights, and LED2 (D5) and LED3 (D6) light alternately in a
heartbeat pattern.
