LaserBit PicoPlus Series 1.0 page
9
3 Interfaces for PICO PLUS
3.1 100Mbps TP interface
The
Laserbit
Pico Plus PoE
series products are designed to provide easy-to-
use and cost-effective solution for interconnecting Local Area Networks. By utilizing
standard Category 5 cable and using standard IEEE802.3af interface the deployment
of the system is easier than ever. The transparent and wire speed data transfer
together with virtually zero latency assures the easy integration of the system in all
environments.
The
Pico Plus PoE
systems should be considered as repeaters in the network. So
the installation distance between the head and the network device is 100m. The
distance on a back to back site is maximum 5 meters, between the heads.
The Pico Plus PoE system layout
The
Pico Plus PoE
systems connecting to the network with an RJ 45 cable which
provides the power required for operation and the data. The system requires IEEE
802.3af Power over Ethernet switch or power injector. The power consumption suits
to the standards described in the standard. Also provides fast and easy connection
for the management system for more details please see the chapters below. The
system is certified
1M product
, this way 100% eye safe.
