LaserBit Giga Series 4.3 page
46
10.4.4
Connecting to your Network
You have a TC head
You can find a two sided fibre connector
in your ODIU. You have to connect the
fibre cable of your head into the one
side of the connector, and into the other
side you have connect the fibre cable of
you network equipment (switch; router
or LB combiner). The fibre plugs of the
heads are always SC typed, which
means that them cross-sections are
cubic form. The fibre connector in the
ODIU is SC-SC typed, so you have to
provide an SC fibre plug for you
network. The SC-SC connector is a reversible part, so you can connect in the first
plug where you want, the important is that the two plugs of the head have to be on
one side, and the two plugs of the network have to be on the other, and if you plug in
the transmitter side of the head into a connector, then the transmitter side of the
network have to be in the opposite connector of the previous, and do the same with
the other sides too.
10.4.5
Connecting to the management
You have a TC head
Using the RJ11 Sevice Connector and
the two green connectors you can
connect your management indoor unit to
the head.
The necessary signals can be found on
the blue and brown wires of the head
power cable. You have to connect these
two wires into two pins of the four of the
two green connectors. These pins are
connected to the pins of the RJ11
Service Connector. The order of
connections is the following:
Pin of the green connector 4
5
7
8
Pin of the RJ11 Service Connector 4
5
3
2
More details about the management please find to see its own Users’ Manual.
(please connect the blue and the brown wires to the Pin number 4&7 in case of The
Web-Based LB-View MGM unit)
