LaserBit Giga Series 4.3 page
40
10.3.4
Connecting to your Network
You have a TC head
You can find a two sided fibre connector in your ODIU. You have to connect the fibre
cable of your head into the one side of
the connector, and into the other side
you have connect the fibre cable of you
network equipment (switch; router or LB
combiner). The fibre plugs of the heads
are always SC typed, which means that
them cross-sections are cubic form. The
fibre connector in the ODIU is SC-SC
typed, so you have to provide an SC
fibre plug for you network. The SC-SC
connector is a reversible part, so you
can connect in the first plug where you
want, the important is that the two plugs of the head have to be on one side, and the
two plugs of the network have to be on the other, and if you plug in the transmitter
side of the head into a connector, then the transmitter side of the network have to be
in the opposite connector of the previous, and do the same with the other sides too.
10.3.5
Connecting to the management
You have a TC head
Using the RJ11 Sevice Connector and
the two green connectors you can
connect your management indoor unit to
the head.
The necessary signals can be found on
the blue and brown wires of the head
power cable. You have to connect these
two wires into two pins of the four of the
two green connectors. These pins are
connected to the pins of the RJ11
Service Connector. The order of
connections is the following:
Pin of the green connector 4
5
7
8
Pin of the RJ11 Service Connector 4
5
3
2
More details about the management please find to see its own Users’ Manual.
(please connect the blue and the brown wires to the Pin number 4&7 in case of The
Web-Based LB-View MGM unit)
