37 |
P a g e
Amount is used to give a value to the linear length of an edge type being used. (e.g. charging $5 per linear foot of an
ogee edge).
Seam allows the user to designate if a color is a seam line. This is helpful when using Slab Layout allowing you to split
parts of the job along that seam line. The program knows that a seam line will need to be split and duplicated so that it
keeps the line on both pieces.
Default colors are used so that when you initially open the program on a jobsite, you will always have the colors set the
way you intend to use them. This way, you don’t need to define the color for Dimensions, Backsplashes or Text on each
job.
New Color will allow you to add a new color to your pallet while Remove Color will remove whatever color is highlighted
when it is clicked.
Revise allows you to change the color of previously drawn lines by clicking on the color you want to use, then pressing
Revise and taping on the entities you want to change. Revise All does the same only it will change every line’s color to
the chosen color.
2.58 Drop-In
Pre-saved .dxf items can be used as a Drop-In. Mainly sinks and edges are used with the feature but you can add
anything you want. This would include marks to signify edge treatments, center lines for sinks or anything else you want
to design.
1.
Click Drop-In.
2.
Select the drop-in you want to use from the list on the left.
3.
Select the color you want to have the drop-in be presented in.
4.
Rotate the dropping to the angle you want it and click OK.
5.
Select the line you want the drop-in to be on. Remember that you need to first rotate that edge so that when
you drop in the sink they will be parallel to each other.
6.
Lastly, you can offset the sink back away from the edge you placed it on.
1.
Click Offset.
2.
Enter the distance you want to offset the drop-in.
3.
Select the sink you want to be offset. A message will ask "Would you like to move the entire drop-in?"
4.
Click Yes. The sink will turn gray to show you selected it.
5.
Click in the direction you want to offset the sink.
Drop-ins are located in the following path: C:\Users\{UserName}\AppData\Roaming\LT55-XL\v2.0\Templates
2.59 Quick Action
The Quick Action feature is used to store your most commonly used actions. To use the Quick Action feature:
1.
Click Quick Action.
2.
Select the action you want to use from the list.
3.
Use the Quick Action as you normally would.
2.60 Undo
Undo simply take one step backwards to your previous action. This can go as far back as 20 times. So you can Undo 20
actions.
2.61 Redo
Redo
3T
simply takes a step forward after an Undo. So if you clicked
3T
Undo
3T
and went backwards too far,
3T
Redo
3T
will move
you forward in your progression.
